Upgrading boiler controls

[b21playa]

Hi all

Buying a proerty with a baxi bermuda 50/4E back boiler and Danfoss 3020p controls.

I would like to upgrade this to something digital with 7-day programming functionality.

Can anyone recomend any controls, and would it be an easy swap over?

Thanks in advance

 

[Phill Peck]

Will require requiring the programmer.

No straight swap for the 3020

 

[b21playa]

Will require requiring the programmer.

No straight swap for the 3020

Will there be an additional wires required? The programmer is near the chimney and the thermostat in the hallway.

Any recommendations for a decent programmer & thermostat that's easy to use and not expensive?

It's for a rental property so don't want to be spending £200 like I did for my home

 

[Phill Peck]

You shouldn't need to run any new cables. Just wire a new backplate.


http://m.screwfix.com/p/drayton-lp722-mk4-programmer/26078?filtered=true

Cheap and reliable

 

[St0rmer66]

Could always set the timer to constant (or link the live to demand behind the timer) and put in a programmable room thermostat for the least amount of wiring possible.

 

[b21playa]

Hi all

Purchased a grasslin qeg-2, can anyone provide wiring diagram for a Drayton 3020p?

 

[jackthom]

There's a wiring diagram on this datasheet

http://www.uk-plumbing.com/brochure/danfoss/3020Pdata.pdf

 

[b21playa]

There's a wiring diagram on this datasheet

http://www.uk-plumbing.com/brochure/danfoss/3020Pdata.pdf

Thanks

Much appreciated