Our UPVC front door seems to have slipped down by about 1/4 inch on the lock side. We can notice a small gap at the top and it looks a bit askew.
The locking mechanism seems to have got very stiff too.
The hinges are screwed to the edge of the door, with a plate on the inside of the door, this hinge is fixed to the door casing with a pin.
Is there a way to adjust the door?
The locking mechanism seems to have got very stiff too.
The hinges are screwed to the edge of the door, with a plate on the inside of the door, this hinge is fixed to the door casing with a pin.
Is there a way to adjust the door?