Hi, I have just bought... http://cgi.ebay.co.uk/ws/eBayISAPI....m=180181535650&ssPageName=STRK:MEWA:IT&ih=008 ...a couple of these but do not intend using them as intended, which is inside a computer.
What I am planning to do is put them in a glass casing and use a UniRoss 12V unregulated AC/DC adaptor (transformer) to power them. As the items have yet to arrive I am just asking if this is possible or more importantly 'safe'. I was thinking of just connecting the female connector that comes with the lights onto the end of transformer wire to connect the two but I would also like to have an on/off switch through the wire at some point
Please advise is this is feasable and I would most appreciate any better ways of doing this,
Thanks in advance
Graeme
What I am planning to do is put them in a glass casing and use a UniRoss 12V unregulated AC/DC adaptor (transformer) to power them. As the items have yet to arrive I am just asking if this is possible or more importantly 'safe'. I was thinking of just connecting the female connector that comes with the lights onto the end of transformer wire to connect the two but I would also like to have an on/off switch through the wire at some point
Please advise is this is feasable and I would most appreciate any better ways of doing this,
Thanks in advance
Graeme
Links in this post may contain affiliate links for which DIYnot may be compensated.