Good luck with it, I know that pain....
Sponsored Links
Well, sometimes if you want a job done properly, you have to get on and do it yourself. First time bending pipes and I thoroughly enjoyed it! Wilo bronze pump fitted (above expansion in pic) and pipe as close to furthest tap as possible, but still 7 meters away. Pipes all lagged now and works great - hot water time reduced from an unusable 40 secs to 6 secs!
- Joined
- 22 Jan 2007
- Messages
- 8,310
- Reaction score
- 4,131
- Country
Assume if you did it properly you also fitted a check/no return valve on the secondary return or have it built into the valves at the pump?
You assumed correct, the Wilo pump has a check valve built in - nifty bit of kit (if not a bit expensive!).
Sponsored Links
- Joined
- 22 Jan 2007
- Messages
- 8,310
- Reaction score
- 4,131
- Country
Good to know. Will be looking for one for mine soon
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
