hello, I'm hoping someone can help me.
I have a Vaillant Ecotec PLus & a Digistat RF+ wirelss thermostat.
I don't know much about how they work but downloaded then manuals to try to help myself.
I have hot water fine but the radiators won't heat and there is no radiator symbol on the boiler screen.
The radiaotoar ARE on at the source
The radiators knob on the boiler IS set to on
The knob IS turned to a hot setting
I HAVE replaced the thermostat batteries
I HAVE set the requiremd room temp to a higher setting to make sure it should call for heat
The current room temp IS lower than the temp I'm calling for
The green light in the receiver IS on
There IS a flame symbol on the thermostat screen
The pressure gauge IS in the dark grey
I don't know much about boilers or thermostats but I'm stuck, cold and my poor 9 week old baby is cold so if anyone could help I'd be very gratfeul.
Thank you
I have a Vaillant Ecotec PLus & a Digistat RF+ wirelss thermostat.
I don't know much about how they work but downloaded then manuals to try to help myself.
I have hot water fine but the radiators won't heat and there is no radiator symbol on the boiler screen.
The radiaotoar ARE on at the source
The radiators knob on the boiler IS set to on
The knob IS turned to a hot setting
I HAVE replaced the thermostat batteries
I HAVE set the requiremd room temp to a higher setting to make sure it should call for heat
The current room temp IS lower than the temp I'm calling for
The green light in the receiver IS on
There IS a flame symbol on the thermostat screen
The pressure gauge IS in the dark grey
I don't know much about boilers or thermostats but I'm stuck, cold and my poor 9 week old baby is cold so if anyone could help I'd be very gratfeul.
Thank you