Valliant Turbomax Pro 24e: My boiler shuts down after 10 -15 seceonds after iginition. I have read the manual and it points to lack of water or poor water circulation. I have cleaned the main and hot water exchanger, checked the internal of aqua sensor and still can not get this working. I have just removed the pump and checked no debris. Please any suggestions will be apperciated. Next to check wll be diverter valve and APS.
Vaillant Turbomax Pro 24E IGINITION PROBLEMS!
- Thread starter danell8
- Start date
Sponsored Links
As a DIYer you should not be opening the combustion chamber! We are not permitted to assist DIYers with gas/combustion related work.
The obvious advice is that you get a registered engineer to come and diagnose the fault and check that the boiler is safe after what you have been doing.
Tony
The obvious advice is that you get a registered engineer to come and diagnose the fault and check that the boiler is safe after what you have been doing.
Tony
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
