Help, new boiler Valliant ecotec 837 fitted in October. Three times recently fault F22, opened valves to pressurise boiler fires up for heating but no hot water - dry. Is this air lock? What can I do, engineer not available until Monday. Installer not replying
Valliant ecotec 837 help!!
- Thread starter scole
- Start date
Sponsored Links
You are losing all pressure from your central heating side ? i.e. pointer is in red ?
Was the installer gas registered and did he fill in the Benchmark?
It sounds like a second or third rate installer who will not reply to your calls.
Was it done at a reasonable price or were you taking a cheap price to get a cheap job?
To replace another combi we would have charged £840 plus the cost of the boiler.
Tony
It sounds like a second or third rate installer who will not reply to your calls.
Was it done at a reasonable price or were you taking a cheap price to get a cheap job?
To replace another combi we would have charged £840 plus the cost of the boiler.
Tony
Sponsored Links
Scole
You need to ensure that the filling link tap on the cold water side(right hand one) is closed, as when left opened and filling link is just shut on flow side(left hand one) then no water comes through the DHW side.
Graham
You need to ensure that the filling link tap on the cold water side(right hand one) is closed, as when left opened and filling link is just shut on flow side(left hand one) then no water comes through the DHW side.
Graham
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
