I've built I timber framed garden room in my garden.
I'm not sure about a detail relating to a vapour barrier or breathable membrane.
The area of concern is the floor, it's a timber suspended floor, which has celotex between the joists. The underneath is vented for airflow but otherwise sealed.
I am about to put 18mm MR Chipboard flooring down but am wondering do I need a breathable membrane or vapour control layer between the two?
Equally whilst mind is whirring, same question, the walls are externally to internally, 20mm Cladding 2x25mm batton, breather membrane, 11mm osb on 4x2 stud, I'm putting knauf accoustic insulation in the walls and celotex in the roof then plasterboard, do I need a vapour control layer behind the plasterboard please?
I'm not sure about a detail relating to a vapour barrier or breathable membrane.
The area of concern is the floor, it's a timber suspended floor, which has celotex between the joists. The underneath is vented for airflow but otherwise sealed.
I am about to put 18mm MR Chipboard flooring down but am wondering do I need a breathable membrane or vapour control layer between the two?
Equally whilst mind is whirring, same question, the walls are externally to internally, 20mm Cladding 2x25mm batton, breather membrane, 11mm osb on 4x2 stud, I'm putting knauf accoustic insulation in the walls and celotex in the roof then plasterboard, do I need a vapour control layer behind the plasterboard please?

