Well, now i have the taps fitted however from both the cold and hot taps there is a very slow leak, few drips a minute. It is definaly coming fromthe place the taps join to the pipes.
When i removed the old taps there were no washers, so i figured they were not needed. IS this foolish and wrong ?
If not what can you suggest to stop the leak, I used a couple wraps of PTFE maybe a re join with a bit more PTFE ?
When i removed the old taps there were no washers, so i figured they were not needed. IS this foolish and wrong ?
If not what can you suggest to stop the leak, I used a couple wraps of PTFE maybe a re join with a bit more PTFE ?