1920’s house renovating the lounge and after removing ceiling have found the joists to be all over the place.
After some reading up have decided to go the route of fixing up some cls timer at 90 deg to original joists, starting at low point and packing them out level.
Would 36 x 63 cls timber be ok?
That way only loose 36mm of ceiling height.
Spaced at 300mm apart.
Thx
After some reading up have decided to go the route of fixing up some cls timer at 90 deg to original joists, starting at low point and packing them out level.
Would 36 x 63 cls timber be ok?
That way only loose 36mm of ceiling height.
Spaced at 300mm apart.
Thx