i want to lay vinyl tiles on my bathroom floor. Is there any special method/procedures i should use before i stick them down to protect the floorboard underneath from any water seeping through. or do you just stick them on to the floorboard?
Vinyl tiles in bathroom
- Thread starter kermerter
- Start date
Sponsored Links
Hi,
Don't lay the vinyl tiles directly onto floorboards...the movement in the boards will crack them.
You have to line the floorboards first with plywood.
After the tiles are laid on the plywood you could apply a few thin coats of polish...but that doesn't exactly make for a non-slip floor, and it doesn't make the floor waterproof.
If water penetration is a problem then you need sheet vinyl.
All the best.
Don't lay the vinyl tiles directly onto floorboards...the movement in the boards will crack them.
You have to line the floorboards first with plywood.
After the tiles are laid on the plywood you could apply a few thin coats of polish...but that doesn't exactly make for a non-slip floor, and it doesn't make the floor waterproof.
If water penetration is a problem then you need sheet vinyl.
All the best.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
