ViSonic PowerMaster 30 - Line Failure - FYI thread - FIX

[an4gem]

Hi All,

This is a FYI thread:

The control panel had "Line Failure" trouble, which had the whole system in no ready mode... took me all day to figure out by playing with all menus..

The PSTN is not connected, however had a GSM module attached.

I had to disable the 2 available options in the 4:Communication > 3:C.S.REPORTING > 53:COM.FAIL RPRT.

C.S Reporting is used to communicate to a monitoring station....

Good Luck

 

[Tilermanner]

Hi All,

This is a FYI thread:

The control panel had "Line Failure" trouble, which had the whole system in no ready mode... took me all day to figure out by playing with all menus..

The PSTN is not connected, however had a GSM module attached.

I had to disable the 2 available options in the 4:Communication > 3:C.S.REPORTING > 53:COM.FAIL RPRT.

C.S Reporting is used to communicate to a monitoring station....

Good Luck

You're a lifesaver - it took me through couple of deafening siren blaring rounds before I decided to stop playing around with it and looked up in the forum. Many thanks!!

 

[Bannservices]

Many thanks for the posting saved me a marriage her mobile was getting notifications each time I tried to trouble shoot the line failure fault

 

[Ben-tootis]

Hero, saved me a load of time. Thanks