Vista 20P chime only no alarm

[Neil Addams]

I have a Vista 20P wired system with a 6160RF keypad
I want to install a 5800 wireless motion detector. I want it to chime only not alarm.
On Partition 1, I have my regular alarm system.
I want to have 2 wireless Motion detectors, I do not want them to alarm but I do want them to chime when there is motion. Chime only, no alarm.
How do I set this up?
Can I use Partition 1 or do I need to use Partition 2?
How do I do this?

 

[secureiam]

not familiar with this system but most wireless PIR's sleep for a few minutes or get turned on when the system is armed making them unsuitable usually for chime zones, if the pir can be permanently on the batteries are likely to run down very quickly, if it sleeps then you may be able to get a chime if its activated, but wouldn't be able to get another one for several minutes.

I am sure someone else may be able to give you more specific help.

 

[Neil Addams]

Thanks for your help