- Joined
- 4 Apr 2020
- Messages
- 4
- Reaction score
- 0
- Country
Hi All,
I’ve just fitted a Vokèra 7 day RF programmable room thermostat to a newly installed Vokera Easi-Heat plus 25Ci and I’m not happy with the LED indications on the receiver.
Wired as per the boiler and thermostat manual with 2 x light blue and the single black wire removed from CN5 and the two black wires from the new receiver wired into CN5. Line and Neutral linked in to incoming power to the boiler.
LED indications - boiler off - green LED flashing about every second. Boiler on - green LED flashing rapidly. Boiler seems to work according to programmed times and temperatures, but the LED indications don’t seem right and don’t tie in with any videos I’ve watched. Vokèra technical help weren’t much use to be honest. Their reply was “I would remove the two pale blue and black wire from CN5, so you don’t have two clocks connected. The lights will flash on the receiver all the time, and change during operation.” Of course I’d already wired CN5 as described as per the manual.
Any ideas? Many thanks.
I’ve just fitted a Vokèra 7 day RF programmable room thermostat to a newly installed Vokera Easi-Heat plus 25Ci and I’m not happy with the LED indications on the receiver.
Wired as per the boiler and thermostat manual with 2 x light blue and the single black wire removed from CN5 and the two black wires from the new receiver wired into CN5. Line and Neutral linked in to incoming power to the boiler.
LED indications - boiler off - green LED flashing about every second. Boiler on - green LED flashing rapidly. Boiler seems to work according to programmed times and temperatures, but the LED indications don’t seem right and don’t tie in with any videos I’ve watched. Vokèra technical help weren’t much use to be honest. Their reply was “I would remove the two pale blue and black wire from CN5, so you don’t have two clocks connected. The lights will flash on the receiver all the time, and change during operation.” Of course I’d already wired CN5 as described as per the manual.
Any ideas? Many thanks.