Vokera Excel 25 boiler and Hive Single

[nyc6699]

Hi all, Can someone please check my understanding of a hive single to my Vokera Excell 25 boiler please.

Image 1 is the boiler PCB and CN5 has the current thermostat and controller fitted.

Image 2 is the standard hive single channel.

My thoughts are as follows

N and L permanent on the hive to the switched 240v spur for power.

Hive 1 (common) and 3 (heating on) to CN5 on the boiler PCB. 2 and 4 not used.
Does it matter which way the wires go on CN5?

Is that right and if so do i also link permanent live and common on the hive or does that not matter.

If not any of the above can someone advise please.

Many thanks

 

[vulcancontinental]

The two cores currently taken into CN5 on the PCB remain unaltered and are now connected to terminals 1 and 3 in the Hive receiver. L and 1 in the Hive receiver should not be linked. Connect LNE of the Hive to the mains supply

 

[nyc6699]

Sorry just to confirm. Remove the current wires in CN5 and replace with 1 and 3.
Does it matter which way they go in CN5.

Noted re NOT linking.

Many thanks

 

[ianmcd]

Sorry just to confirm. Remove the current wires in CN5 and replace with 1 and 3.
Does it matter which way they go in CN5.

Noted re NOT linking.

Many thanks

no either way round will work , and to reitterate DO NOT make any links

 

[nyc6699]

Ideal. Much appreciated
Cheers