Wago 6mm should I crimp?

[OldKettle]

Hi,
I have bought some of these Wago connectors to connect 6mm cables in a junction box on a cooker circuit.

https://uk.rs-online.com/web/p/non-fused-terminal-blocks/1750358

I am getting a good connection in most cases but a couple of stranded wires just do not fit very well, and have come loose, while wrestling everything into a Wago junction box.

Should I consider crimping a bootlace ferrule on the ends of the problematic wires?

If so, would something like these do the trick?

https://uk.rs-online.com/web/p/crimp-bootlace-ferrules/1571266/

https://www.screwfix.com/p/ratchet-crimping-tool-1-0-10mm/96561

 

[chivers67]

What type of 6mm are you talking about here? If it's stranded get the Ferrules for sure

 

[OldKettle]

What type of 6mm are you talking about here? If it's stranded get the Ferrules for sure

Hi. Yes it's stranded. Thanks.

 

[333rocky333]

A ferrule will make it bigger and then it wont fit the wagos, for a high current joint your better with a 60 amp JB, if its accessible.

 

[AndyPRK]

What sort of 60A jb

 

[333rocky333]

https://www.tlc-direct.co.uk/Produc...MI5-zV7fmR4gIVL7vtCh2oMQTKEAQYASABEgKY0fD_BwE