Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Have a 10 yr. old GE. On start, water runs into unit. Nothing else. You can hear the timer running, and the drying element heats up at end of cycle. Doesn't pump, doesn't drain. Any ideas???
Bud, Go to repairclinic.com for help. They have a forum like this to identify problems. Have not used the "help" section though. I had a leaky seal on my dishwasher. Bought the parts & a book (left handed threads on one assembly) and all is well. Right off the bat sounds like a motor or wiring problem. One motor does both functions. Open the feed breaker to it, pull off the bottom kick cover. There should be a schemetic of all the electrical circuits in a plastic bag glued to the other side of the kick panel. Look it over. Also at this time, you can look for loose connections near the motor. It's pretty tight under there. Good luck
Mark
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local