What’s this valve for!?

[Greig Dobson]

Soo I’m looking at changing the solenoid on my three way valve (hence it’s not on in the picture) but looking at the system I cannot work out what the branch offtake between the pump and the three way valve is? Take a look at the pic

 

[MickyP10]

Bypass? Experts will be along soon...

 

[Dangee]

Bypass into an air separator, bet that’s not blocked!

 

[dilalio]

Jeez... Maybe you need a few more gate valves!

 

[dilalio]

solenoid

Actuator

 

[CBW]

What’s wrong with your Honeywell 3 port?

 

[Greig Dobson]

Bypass into an air separator, bet that’s not blocked!

Ok so should the valve be open or closed during normal operation... bypass makes it sound like it should be closed... but didn’t the system need an air separator all the time??

 

[Greig Dobson]

What’s wrong with your Honeywell 3 port?

It’s making some very annoying clicking noises and whenever the boiler is on we get hot water and heating, no matter what the setting on the timer

 

[ianmcd]

Air seperators were snake oile and block for fun , doubt if it will still be working

 

[oldbutnotdead]

The leg from the gate valve doesn't go into the top of the airsep- I thought it did as well & that would make no sense at all but it drops just behind the top tube coming out of the airsep (which presumably goes to the vent). Almost certainly paupers bypass. I fitted one of those air separators- whether it did any good or not I have no idea but system ran fine for 28 years.

 

[TimboTwo]

Could be towel rail feed.