What elbow connector for cistern?

Joined
22 Aug 2008
Messages
521
Reaction score
10
Country
United Kingdom
I am replacing the cistern and the old one was bottom entry, the new one is side entry. I am simply going to run a flexi hose from old pipe connector to the new one. The problem is I need a 90 degree connector that plugs into the male tread on the inlet valve that sticks out of the cistern to the flexi pipe. I assume it is some sort of 15mm female connector but I am not 100% certain which connector I need.

Any ideas?

Thanks
 
Sponsored Links
I have that, but I need the connector that goes into the cistern to be a right angle, otherwise I would bend much too big in the flexi pipe that will cause a kink. It is a standard tap connector on the inlet valve.
 
Sorry - edited my post as you replied

See above for flexi with elbow
 
Sponsored Links
Do flexis with elbows exist? That would solve the problem I will google it now :). I just assumed they didn't exist and would to get a female tap connector eblow joint or something.
 
Brilliant thanks a lot :) Now ideally I need to try and find a 400mm one, buy they seem rare at the best times, if not a 300mm should just about fit.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top