My Indesit WIDL126 washing-machine has been making a helluva noise for months now. I managed to remove a large chunk of metal from between the inner and outer drums by pulling it through the hole for what I think is the the temperture sensor - a round plastic thing about 2cm across, held in place with a rubber grommet.
However, below that are two things that look like probes. One on the right has a blue wire, one on the left a brown wire, into a blue plastic cylindrical casing, about 7mm in diameter. I managed to snap off the one with brown wire going to it, and as it's a copper "pin" into the drum, I can't refasten it to the brown electrical wire.
Anyone know what this probe thingy does, and is it important? The machine seems to work fine without it!
Cheers
L
However, below that are two things that look like probes. One on the right has a blue wire, one on the left a brown wire, into a blue plastic cylindrical casing, about 7mm in diameter. I managed to snap off the one with brown wire going to it, and as it's a copper "pin" into the drum, I can't refasten it to the brown electrical wire.
Anyone know what this probe thingy does, and is it important? The machine seems to work fine without it!
Cheers
L