What size flat washer to stop basin tap dripping?

[milgo123]

Would anyone know or care to guess what size flat tap washer I would need to use to stop the hot tap below from dripping?

Screwfix

Swirl Bathroom Basin Taps Pair

Product Code: 88965

Thanks

 

[HERTS P&D]

This will do:

https://www.screwfix.com/p/flomasta-replacement-tap-washers-170-pcs/69671

Andy

 

[HERTS P&D]

You need the 1/2" ones.

Andy

 

[Servotech]

If they're 1/4 turn they'll have inserts not washers in them.
Very few taps have washers in them these days.

 

[CBW]

If you only need the 1/2” ones, I’d go for https://www.toolstation.com/pegler-...pz_y4LEu3YCKqcvf6BwaArrGEALw_wcB&gclsrc=aw.ds

 

[CBW]

If they're 1/4 turn they'll have inserts not washers in them.

They’re screw down type, as per the product code

 

[oilhead]

Look at the product spec on Screwfix and you'll see there is the part no for the glands you require in the Q&A option

 

[milgo123]

Thanks all. 1/2" from Toolstation it is then.

The taps are probably 8 years old and we live in a hard water area so plan A is replace the washer but if it's all seized up then it will have to be new taps.

 

[milgo123]

So there's some bum information in the Q&A regarding replacement 1/4 turn glands