Hi, just doing the roof of my orangery and wondered what the recommendations were for the type and thickness of plywood to cover the top of the external part of the exposed rafter ends?
The rafters are oak and at 400mm centres. Ideally I would like the ply to weather and look the same as the oak after a while or at least not stand out too much. Also I'm not too sure how wet the end of the ply would get as it would be under the tiles and the underlay support tray.
Many thanks.
The rafters are oak and at 400mm centres. Ideally I would like the ply to weather and look the same as the oak after a while or at least not stand out too much. Also I'm not too sure how wet the end of the ply would get as it would be under the tiles and the underlay support tray.
Many thanks.