Some are wet cast, some for higher strength are hydraulically pressed.
why was my concrete "rocky"?
- Thread starter SpiderTrev
- Start date
Was that in anger or frustration?.. also kicking, i did kick them a lot, don't forget that
- Joined
- 25 Jan 2025
- Messages
- 84
- Reaction score
- 11
- Country
hahah yes definitely! both! but also to work out the air bubbles... fine it was mostly anger
- Joined
- 7 Sep 2022
- Messages
- 4,351
- Reaction score
- 1,244
- Country
Put your SDS drill in no-rotate mode and use a blunted chisel on the mould.. also kicking, i did kick them a lot, don't forget that
- Joined
- 25 Jan 2025
- Messages
- 84
- Reaction score
- 11
- Country
i don't own an SDS drill. however i have been contemplating buying one recently, a lot...Put your SDS drill in no-rotate mode and use a blunted chisel on the mould
You need one with a rotary stop if you intend using it as a vibrator.i don't own an SDS drill. however i have been contemplating buying one recently, a lot...
But don't tell the missus
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
