Will new wireless thermostat bind with existing receiver?

Joined
28 Dec 2007
Messages
69
Reaction score
7
Location
Worcestershire
Country
United Kingdom
We have a Center 340017(EHE0200373) wireless programmer/thermostat (it's actually a Honeywell rebadged) which has started to do odd things so I am thinking of replacing it with, hopefully, an identical one. Will it bind/pair with the existing receiver box (also Center badged) or do I have to buy a new one? Obviously it involves a more work to do this so I want to avoid it if possible. Advice appreciated.
 
You can buy them seperately so try a new thermosta with your old receiver and if it doesn't pair then buy a new receiver
 
It may bind up, but some don't as I have tried with other rebadged honeywell. The existing receiver may be able to swap directly for the new. Photo of said receiver?
 
They're both five years old.
 

Attachments

  • 20261029_162541.jpg
    20261029_162541.jpg
    423.2 KB · Views: 15
  • 20261029_162649.jpg
    20261029_162649.jpg
    271.2 KB · Views: 18
centre brand come as a pair you cant buy separate
Doddle to change receiver anyway its only 4 wires
Think they are around 60 quid at present
 
centre brand come as a pair you cant buy separate
Doddle to change receiver anyway its only 4 wires
Think they are around 60 quid at present
Would a new one not just clip onto existing backplate?
 
They're both five years old.
Yeah, a Honeywell probably won’t connect up as receiver not the bdr91 type. Only one that might would be the Pro series which the receiver is similar, but as per @gas112 - wires would be a doddle, even more so if it clips onto existing backplate.
 
edit
They have changed the backplate and front cover a couple of times so may not actually be compatible with older versions
 
Last edited:
Thanks for all the advice.
Most sellers I've looked at sell them as a pair for £60 - £80. I am able change the receiver box if necessary, I just wanted the easiest (and laziest) route as it's in an awkward place. I've had half-hearted attempts in the past to get the cover off the receiver to get to the fixings as I wanted to move it to a more visible position without craning my neck around the boiler to see if it had received the signal when I was diagnosing the possible malfunction of the thermostat.
Ours is a 340017 with four switching points per day. The only one I've found so far is a 340022 with only two switching points.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top