Window in shower area

Joined
28 Oct 2014
Messages
68
Reaction score
0
Location
Leeds
Country
United Kingdom
Hey is there any problem of having a window (frosted). In the showering area above the bath the window will all be tiled, it isn't at the minute. its a upvc window so no wood. T View media item 84663
 
Sponsored Links
just a shower run of the bath taps, the shower head will be on the wall above the bath taps.
 
Sponsored Links
Fine go ahead and tile using appropriate adhesive and grout for wet conditions. Have a very faint slope on the cill tiles - this will prevent pooling on the cill.
 
Fine go ahead and tile using appropriate adhesive and grout for wet conditions. Have a very faint slope on the cill tiles - this will prevent pooling on the cill.

Could try giving the cills a slope so that any water clears and get a squeegee to get the bulk off after each shower - good idea to squeegee anyway.
 
Thanks and is it ok to tile the top of the window by putting a tiling batten across. Will these tiles stay in place once removed, and not fall off in to the bath.
 
Yes, go ahead and tile the soffit of the window reveal - construct what is sometimes called a centre. Wedge the tiles up and release the centre after a few hours.
 
So I can tile the top of the window were there will be nothing underneath to hold the tiles in place. Do I need special adhesive for this?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top