- Joined
- 25 Oct 2020
- Messages
- 16
- Reaction score
- 0
- Country
Hi, light stopped working in bathroom, checked bulb, then checked switch, found that wires had came loose out of terminal(s).
I can't figure out where the wires go back in. Can't ask electrician round at moment because self isolating, waiting Covid results.
There's no window in bathroom so relying on battery powered LED lights.
Please see picture attached.
Terminals are labelled com, 1way and loop.
There is an extractor fan coming off of it, and the consumer unit switch for 1st floor lighting has smoke alarm label also.
Can anyone please help with this? We have small children and it's really difficult with no lighting to bathroom when it's pitch black in there.
There are 5 brown wires, and one black with brown sleeve.
Thanks so much!
I can't figure out where the wires go back in. Can't ask electrician round at moment because self isolating, waiting Covid results.
There's no window in bathroom so relying on battery powered LED lights.
Please see picture attached.
Terminals are labelled com, 1way and loop.
There is an extractor fan coming off of it, and the consumer unit switch for 1st floor lighting has smoke alarm label also.
Can anyone please help with this? We have small children and it's really difficult with no lighting to bathroom when it's pitch black in there.
There are 5 brown wires, and one black with brown sleeve.
Thanks so much!