Wiring advice for new cooker

[colfaedalry]

Thanks for adding me to forum. I have read a few posts with same topic but still unure about cooker wiring. I am looking to buy this cooker from John Lewis
Beko BDVC667S Electric Double Cooker

In spec it says the current maximum the switch will carry continuously is 32amp
current cooker set up is an old creda cooker unsure of model. Wired from fuse box on a 45amp breaker 6mm cable 2mtrs long going to switch on wall with 50cms 6mm cable going to cooker. Would this setup be ok re-done for new cooker or do i need a 32amp breaker at fuse box. Thanks

 

[flameport]

Yes, totally suitable for the new cooker.

 

[colfaedalry]

Thanks for reply just double checking before i ordered it