1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Wiring hive receiver to Ideal logic esp1 30 boiler

Discussion in 'Plumbing and Central Heating' started by Barry Hughes, 9 Oct 2021.

  1. Barry Hughes

    Barry Hughes

    Joined:
    9 Oct 2021
    Messages:
    1
    Thanks Received:
    0
    Country:
    United Kingdom
    Hi, I have bought the Hive active heating, it will be replacing the Siemens rdj10rf set up. At the Siemens receiver I have the power supply which has the live and neutral wires connected live to live neutral to neutral going to the live and neutral ports of the receiver, also a cable to the receiver for switching on and off- L1 is the blue wire LX the brown. The live and neutral power is obvious but where do I put the L1 and LX wires on the hive receiver. Any help would be great.
     
  2. Sponsored Links
  3. CBW

    CBW

    Joined:
    26 Sep 2019
    Messages:
    9,073
    Thanks Received:
    2,426
    Location:
    North
    Country:
    United Kingdom
    From Siemens RDJ10/RF receiver to Hive:

    L - L
    N - N
    LX - Common (Terminal 1)
    L1 - NO/Heating on (Terminal 3)

    Another successful Hive install C/o diynot.com :whistle:
     
    • Thanks Thanks x 2
    • Like Like x 2
  4. muggles

    muggles

    Joined:
    28 Oct 2005
    Messages:
    13,342
    Thanks Received:
    3,077
    Location:
    Daventry
    Country:
    United Kingdom
    And another OpenTherm-capable boiler connected to a crappy on-off stat :(
     
    • Thanks Thanks x 1
    • Like Like x 1
Loading...

Share This Page