Wiring hive receiver to Ideal logic esp1 30 boiler

[Barry Hughes]

Hi, I have bought the Hive active heating, it will be replacing the Siemens rdj10rf set up. At the Siemens receiver I have the power supply which has the live and neutral wires connected live to live neutral to neutral going to the live and neutral ports of the receiver, also a cable to the receiver for switching on and off- L1 is the blue wire LX the brown. The live and neutral power is obvious but where do I put the L1 and LX wires on the hive receiver. Any help would be great.

 

[CBW]

From Siemens RDJ10/RF receiver to Hive:

L - L
N - N
LX - Common (Terminal 1)
L1 - NO/Heating on (Terminal 3)

Another successful Hive install C/o diynot.com

 

[muggles]

Another successful Hive install C/o diynot.com

And another OpenTherm-capable boiler connected to a crappy on-off stat