Wiring in double dimmer?

Joined
1 Sep 2015
Messages
371
Reaction score
6
Country
United Kingdom
So we had some electricians in to wire up our lighting in the lounge. Originally there were wall lights and 2 pendants which were powered from 1 double switch.

I recall the electricians saying something about both pendants having a mains feed.

We got the sparks to remove the 2 pendants and replace it with a single, and then remove the wall lights and install downlights. These would both be controlled from a double dimmer in the same location as the original switch.

I've come to adjust the dimmers today, and the damn wires snapped off inside the dimmer units!. Now from what I can recall, they were wired up like so with the coms being linked together.

Pendant
L2 -> N/A
Coms -> Brown Link
L1 -> Live

Spots
L2 -> Live
Coms -> Brown Link
L1 -> Live (Black wire with red sleeve)

I've rewired it as above, but I can't seem to get any of the lights to work at all. Is anyone able to advise what I might be doing wrong? I'm sure the pendant is wired up as it was done by the sparks. As it came off, im 99.99% this is how it came off with the 2 loose wires coming out in position:
2015-12-09.jpg
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top