Hi all - I'm replacing an existing freestanding electric oven with separate electric hob and oven.
The hob is rated 6.0Kw -- and the oven is has a max output rating of 3.65Kw.
It's on a 30A circuit that uses 6mm t+e to the cooker control unit and then on to the cooker connection point using the same 6mm2.
I want to supply both appliances from the same isolator - hence my questions:
Can the supply/cable handle both appliances?
Can I supply the oven using a switched fused spur next to the cooker - if so what cable should be used between the isolator and spur, the which fuse and cable between the spur and oven?
Also, I'm considering changing the existing cooker isolator switch to one that has a plug socket included - will this have any implications?
Thanks in advance
Ken
The hob is rated 6.0Kw -- and the oven is has a max output rating of 3.65Kw.
It's on a 30A circuit that uses 6mm t+e to the cooker control unit and then on to the cooker connection point using the same 6mm2.
I want to supply both appliances from the same isolator - hence my questions:
Can the supply/cable handle both appliances?
Can I supply the oven using a switched fused spur next to the cooker - if so what cable should be used between the isolator and spur, the which fuse and cable between the spur and oven?
Also, I'm considering changing the existing cooker isolator switch to one that has a plug socket included - will this have any implications?
Thanks in advance
Ken