A bit of assistance if possible please. I have a Halstead Ace combi boiler and I'm fitting a Horstmann HRFS1 Wireless thermostate. On the Halstead I have a link which is from the 230v live feed (L1) and goes to (l3) which feeds the mechanical timer this is to be used for a thermostate. I was told by Horstmann to put the live side (L1) from the boiler to the Live on the receiver (with the jumper) as per page 9 and the Neutral back to the boiler (L3). Done this and the wireless controller is NOT controlling (turning the boiler on / off). the remote controller is operating as the manual says but I have no green light on the receiver. Any suggestions please have I wired it correctly??
Wiring of Horstmann HRFS1 wireless Thermo to Halstead Ace co
- Thread starter Pob12837
- Start date
Sponsored Links
ok now had a light bulb sorted
L3 is a switched live - NOT neutral.
So what have you used for the actual neutral to the receiver.
So what have you used for the actual neutral to the receiver.
Hi EFL
Have resolved the issue I had wired it correctly but the actual receiver was faulty, have now replaced it and all working great. thanks for your reply.
Have resolved the issue I had wired it correctly but the actual receiver was faulty, have now replaced it and all working great. thanks for your reply.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
