- Joined
- 5 Feb 2014
- Messages
- 4
- Reaction score
- 0
- Country
Boiler was working great.
I thought I would be clever and bled two radiators. That went well, but I didn't repressurise the boiler.
So when I tried to bleed a third radiator, no air or water came out of it and I didn't put the cap back on properly.
Anyway, that caused a leak and the reason the boiler went off and for no water pressure in the boiler discovered!
That fixed and the boiler repressurised into the green zone.
But boiler shows an EA error. If I press the reset button, it gets up to 20-21 and then goes back to EA.
Is there something simple I need to do to get the boiler working again?
I thought I would be clever and bled two radiators. That went well, but I didn't repressurise the boiler.
So when I tried to bleed a third radiator, no air or water came out of it and I didn't put the cap back on properly.
Anyway, that caused a leak and the reason the boiler went off and for no water pressure in the boiler discovered!
That fixed and the boiler repressurised into the green zone.
But boiler shows an EA error. If I press the reset button, it gets up to 20-21 and then goes back to EA.
Is there something simple I need to do to get the boiler working again?