Hi everyone. My washer dryer has broken down and been fixed a few times, and is now broken again. The engineer last time told us it's because we don't use the dryer - it corrodes and messes up the electrics. The dryer is so useless we just don't bother using it. I've researched it a bit and it seems to be a common problem with these washer dryers, and I've seen people recommend just disconnecting the dryer part. I'd like to try this as the machine seems to be fine otherwise. Can anyone talk me through this as a complete newbie or would you not recommend it?
From what I can gather online the metal part in the middle that goes from top to bottom is the dryer part I have to disconnect. I read it was the 4 wires at the top. I'm just unsure now what to do next as there are lots of wires. Any help would be greatly appreciated!
From what I can gather online the metal part in the middle that goes from top to bottom is the dryer part I have to disconnect. I read it was the 4 wires at the top. I'm just unsure now what to do next as there are lots of wires. Any help would be greatly appreciated!