B
Bodd
Hello All
Can I have some advice please. Im following a schematic for a job I'm doing in London
After the flow comes from the Low loss header it goes to a pump then to a three port valve from there it splits going to the central heating with two zone valves controling four levels and then from the three port going to 2 x unvented cylinders , not showing any two ports on the flow to the cylinders
Does this sound right to you.
Thank you as always Bod
Can I have some advice please. Im following a schematic for a job I'm doing in London
After the flow comes from the Low loss header it goes to a pump then to a three port valve from there it splits going to the central heating with two zone valves controling four levels and then from the three port going to 2 x unvented cylinders , not showing any two ports on the flow to the cylinders
Does this sound right to you.
Thank you as always Bod