Er, no; I say what I mean and I mean what I say, and neither of those coincides with what you think.
I quite agree - it is not your problem.
PLASTIC CENTRAL HEATING
- Thread starter pooleys2003
- Start date
N
namsag
well we know you have some strange prefrences softas . So it seems you can live with most things 
N
namsag
Away and run to the moderators softas and see if you can get it locked as you usually do.
But it still wont change the fact that for someone who loves to re quote everyone and pick there answers to bits to prove he is right you cannot do it with this topic SIMPLY because you LIE.
Sad little man
But it still wont change the fact that for someone who loves to re quote everyone and pick there answers to bits to prove he is right you cannot do it with this topic SIMPLY because you LIE.
Sad little man
You would struggle to find a topic where that has ever happened, because it hasn't.
On the contrary, I can do the same with this topic, because, as per usual, I'm right.
N
namsag
Topic from 1st AUG titled plastic fittings on page 2 and 3 where i previously asked you to prove your stupid statement which for some strange reason i got some posts removed but you didn`t .
No explaination from any mod and then locked and funny enough there was a few hot discussions that night and not a single mod appeared but amazingly yours did.
So much for your statement that it has not happened or are you going to get this one locked and then my replies altered AGAIN
As i said sad little man
No explaination from any mod and then locked and funny enough there was a few hot discussions that night and not a single mod appeared but amazingly yours did.
So much for your statement that it has not happened or are you going to get this one locked and then my replies altered AGAIN
As i said sad little man
If your preference is for the truth, then why is it that if I even call you by your true first name, you immediately complain to mods to ask for your first name to be deleted?
Funny behaviour for someone who says he likes the truth!
The simple fact must be that you are so frightened of anyone knowing who you are that you have to hide your true identity!
Tony
Come on now boys. We are all adults here, are'nt we ?
I could give stories that no one would believe,but I do'nt, so just give everyone some slack please, be professional.
By the way, did I ever tell you about the time I ......................................................................................................................................................................................................................................................................... and she paid me as well !!!!
I could give stories that no one would believe,but I do'nt, so just give everyone some slack please, be professional.
By the way, did I ever tell you about the time I ......................................................................................................................................................................................................................................................................... and she paid me as well !!!!
N
namsag
Pooleys . We are all adults till softas spits the dummy and throws his teddy bear out the pram 
Better not mention the time i did............................................... but i didnt charge her
Better not mention the time i did............................................... but i didnt charge her
S
Sylvan Tieger
Good call Tony I must admit
Here is some more "truth"
Copper failure can be attributed to any of the following
A- poor installation
B- non reaming of cut piping
C- Acid flux not properly removed after soldering
D- Piping not sized properly as velocity had negative effects such as erosion
E- Water temperature to hot for the velocity of the water
F- No one took the PH factor into consideration
G- not allowing for the coefficient of expansion per degree of temperature change
H- not enough supports Vertically and horizontally
I - Over heating piping and fitting when brazing
J- Improper joint preparation.
k- Use of short radius fittings or not bending tubing properly
L- No using the correct tubing for the job
For a material that has been helping mankind for well over 5,000 years I would have to think it is the installer not the material BUT then again the non skilled would possibly have a problem doing the job a five year old can do gluing plastic together
You seem quaintly obsessed with the idea of demanding proof for something that I regard as fact, whereas the reality is that there is absolutely no incentive whatsoever for me to take pictures, let alone post them for you to examine, of something that I find so commonplace.
If you want to regard the reason for me declining to take pictures as being that it doesn't happen, then I could hardly care less. Please go ahead and believe whatever you like. Be my guest. Knock yourself out. Have a ball. Be bothered. Don't be bothered. It really doesn't make any difference to anything, anywhere, anytime.
As for a topic from which you've had some posts edited or deleted by moderators, it seems an odd kind of logic to attribute that moderator action to anything I've done, since you appear to have had only 2, yes two, posts deleted, ever, compared to 102 of my posts that have been deleted.
Speedfit- have never had a problem with either the fittings( just check the correct seals are in ) or the pipe. Would't use it where its going to be on view though. Quite happy using copper throughout if custard wants -I think theres a bit of inverted snobbery here.
N
namsag
Softas are you telling me you have trawled through 4230 od posts from me to add this up or is there somewhere this information is given.
The two recent posts that where locked where both to do with you and mentioned you having fantasys about teenage boys within them
I have called agile loads of things does that get removed NO so why are yours removed and locked. Very strange
Also if you don`t run to the mods what about Agiles point.
You must be the only domestic plumber in the country who find copper pipe erroded through every single week .
WhoTakes far far more time to argue that he is not lying than it would do to PROVE he is telling the truth and SHUT me up and make me look WRONG AND STUPID but chooses not too this is very strange but then again we have cleared that up ,you are strange
Very simple sad little man who LIES.
The two recent posts that where locked where both to do with you and mentioned you having fantasys about teenage boys within them
I have called agile loads of things does that get removed NO so why are yours removed and locked. Very strange
Also if you don`t run to the mods what about Agiles point.
You must be the only domestic plumber in the country who find copper pipe erroded through every single week .
WhoTakes far far more time to argue that he is not lying than it would do to PROVE he is telling the truth and SHUT me up and make me look WRONG AND STUPID but chooses not too this is very strange but then again we have cleared that up ,you are strange
Very simple sad little man who LIES.
fitted over 500 houses out in hep,speedfit, and polypipe
i would only ever use speedfit out of choice, fitted correctly its safe as houses. Hep is the worst i have ever used.
i would only ever use speedfit out of choice, fitted correctly its safe as houses. Hep is the worst i have ever used.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
