Ecotec plus 831 and Salus 500rf thermostat wiring help plse

[JohnnyS]

Hello,

after a little bit more info on the wiring of the Salus 500rf to my Ecotec plus 831 plse if anyone can help?

It would be very helpful if a helpful person could just tell me where terminals 3,4 and 5 on the boiler connect to the back of the salus receiver unit i.e which terminal on the boiler should the SL (heat on) connection be wired to etc.

Thanks
John

 

[D_Hailsham]

tell me where terminals 3,4 and 5 on the boiler connect to the back of the salus receiver unit i.e which terminal on the boiler should the SL (heat on) connection be wired to etc.

Remove link on back of Salus Receiver.

Connect Permanent Live and Neutral to the Salus L and N terminals.

Remove link between terminals 3 and 4 of the boiler.

Connect Salus COM and NO terminals to terminals 3 and 4 of the boiler. It does not matter which way round.

 

[JohnnyS]

Yeees....... a helpful person! Cheers for that I was lookin for an idiots guide and that explanation was simple and straight forward, thank you!

Cheers
John