Re-siting toilet problem

Joined
6 Nov 2008
Messages
818
Reaction score
12
Country
United Kingdom
We want to fit a close coupled toilet against a wall but our existing waste outlet will not allow us to do this. The outlet comes up from the floor then bends 90 degrees into the rear of the pan. Due to this we can only have a low level toilet. Is it possible to rectify this??

Cheers
 
Sponsored Links
build a false wall or use a swan neck pan coupler.

but some measurements would be nice.
 
Sponsored Links
A back-to-wall close couple pan set may provide you with the solution - plus you'll not see the wastepipe afterwards.
 
Mine does too - installed one of these http://www.wickesbathrooms.co.uk/pottery/toilets/blend-cc-toilet-cistern-and-soft-close-seat which cost £250 and not the price on the website. Worked a treat. You may find something similar.

Edit - not 300mm though!!

hows he going to fit one of them if the end of the pan connector is 175mm from the wall, and his floor waste is 300mm
Was unaware that is was 300 when I posted it originally, hence the edit.
 
Im guessing my only option really is to build a unit to fit the new cistern against. Ideally wanted it against the wall to give the room a bit more space
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top