Hi,
Just after a bit of advice , I have installed the Magnaclean TwinTech and has been running fine but then I noticed one of the radiator valves was leaking, I drained the system fixed the valve and all was good.
But yesterday the heating and hot water stopped working on the boiler, I thought it could be the Magnaclean so I cleaned it out and it was not that dirty and everything fired back up again.
Now this morning the heating usually comes on timer at about 6AM but it never worked but the water was working fine. So I decided to put the boiler on constant and it fired up and everything seemed to be working again? When the heating did come on sounded it like air being in the system, could it have been an airlock yesterday and today?
I have a Worcester 30CDi System Boiler with the Intelligent System Package (TD200 & RT10).
Just after a bit of advice , I have installed the Magnaclean TwinTech and has been running fine but then I noticed one of the radiator valves was leaking, I drained the system fixed the valve and all was good.
But yesterday the heating and hot water stopped working on the boiler, I thought it could be the Magnaclean so I cleaned it out and it was not that dirty and everything fired back up again.
Now this morning the heating usually comes on timer at about 6AM but it never worked but the water was working fine. So I decided to put the boiler on constant and it fired up and everything seemed to be working again? When the heating did come on sounded it like air being in the system, could it have been an airlock yesterday and today?
I have a Worcester 30CDi System Boiler with the Intelligent System Package (TD200 & RT10).