Maximum Felt/GRP/EDPM Roof Pitches

[freddiemercurystwin]

I have a question on roofs, what is the maximum pitch for;

1) a torch on 3 layer felt roof
2) a GRP roof and
3) an EDPM roof

I'm looking at specifying a (approx) 32 deg roof that adjoins a flat roof. It could be tiled but its probably only 1m2 or thereabouts so would look better if kept the same material as the flat roof.

 

[noseall]

I thought these products could be fitted vertical, i.e. no max pitch.

 

[freddiemercurystwin]

Well I've only done single ply vertically before so was just checking with the Pros on here.

 

[Cumbrianroofer30yrsexp]

If using torch on felt or p&r you need to nail your laps along the salvage and along the top before fixing the verge/flashing.If this is not done it will start to slide in hot weather.

 

[freddiemercurystwin]

Thanks Cumbrianroofer300yrsexp, anyone else anything to add?

 

[Cumbrianroofer30yrsexp]

Thanks Cumbrianroofer300yrsexp, anyone else anything to add?

Yep try specsavers.I believe there are some great offers on at the mo!