S
steviez
Hi,
Need to bring a feed to a new electric cooker. It is rated at 2.8KW (built in type cooker) and says its to be hard wired. Will it be OK to bring a new feed from the CU via 2.5mm T+E to a 13A Fused spur protected by a 16A MCB?
Thanks
Need to bring a feed to a new electric cooker. It is rated at 2.8KW (built in type cooker) and says its to be hard wired. Will it be OK to bring a new feed from the CU via 2.5mm T+E to a 13A Fused spur protected by a 16A MCB?
Thanks