tv wires

[jordan1996]

hey guys, as you n see in the pic i have raggled my plasterboard walls to accomidate my tv wires, etc. i now face the problem of how to go about plastering the hole, any help?

Untitled

• jordan1996
• 13 Apr 2013
• 1

Also, im not sure why this pic is upside down? cheers!

 

[Pigeon85]

How deep is it and what wires is it you have done.

 

[jordan1996]

How deep is it and what wires is it you have done.

hey mate, cheers for the quck reply!

its right through the plaster board to the insulation gap, i have a few HDMI wires and the power one, basically the usuall messy ones that hang across your wall

 

[Pigeon85]

Just remember they are there if you come to fixing anything to the wall in future.

Best and easiest thing to do would be to tape and fill using easifill, first you will need to try and wedge some plaster board in there first to bring it as level as you can get.

Search tape and fill on YouTube

 

[1john]

Your power cable cannot run like that, you have put it out of a "prescribed zone"