Looking for wide non standard sink stopper

[Davout]

Our house has a non Uk standard kitchen installation, including a kitchen sink where the sink hole won't take a standard plug.

Instead I'm looking for a wide sink stopper - one of those rubber things with the lips that exceed the sunk hole width - that's 7, 8 or 9 cm in diameter.

Any suggestions where I can find something like this?

 

[Burnerman]

I doubt that a plug like that would be water tight.....could you consider a basket waste fitting?
John

 

[Davout]

Could you point me at an example?

I doubt that a plug like that would be water tight.....could you consider a basket waste fitting?
John

 

[Burnerman]

Sure, if you can look at Screwfix 85413. These fit normal sinks with a large outlet and connect to 40mm waste fittings.
John

 

[misterhelpful]

Is this the kind of thing you mean?

http://www.ebay.co.uk/itm/1x-white-...tchen_KitchenFurniture_EH&hash=item2a349a2a3f

If so, I agree with Burnerman that it's unlikely to be watertight but could be worth a go for a couple of quid.

 

[foxhole]

What size plug do you need.?

 

[Davout]

Minimum 7cm, ideally 8cm in width.

What size plug do you need.?

 

[foxhole]

Minimum 7cm, ideally 8cm in width.

What size plug do you need.?

They are exact sizes to fit, so what size is required?

 

[Davout]

The sink hole is 5.5 cm across, and we currently have a 6cm stopper that is too narrow to do the job.

Minimum 7cm, ideally 8cm in width.

What size plug do you need.?

They are exact sizes to fit, so what size is required?

 

[foxhole]

Thats a standard 2 inch plug required, widely available.