Cheap 10mm T&E
- Thread starter drew mckinlay
- Start date
Sponsored Links
Maybe it's a cheap Chinese website.
What an odd selection of products, cable and drywall screws.
Sponsored Links
K
kai
A word of warning - that site looks dodgy for the following reasons, Prices are too good to be true, there is no valid registered office address, or indeed a Valid street address for contact - it's probably selling either stolen or counterfeit gear, it shows all the tell tale signs of a dodgy site, unless the site owner can demonstrate otherwise! Let your human instincts tell you.
Site domain is registered to a PO Box in the UAE.
The shopping cart allows negative quantities of products, which is such a huge fail that there is no point looking any further.
The shopping cart allows negative quantities of products, which is such a huge fail that there is no point looking any further.
Not disputing the site is awful, but I don't know what domain lookup service you use.....
abbottsway.com
not
abbotsway.com
not
abbotsway.com
ohhhhhhhh. my bad
But the prices per meter tend be be higher when bought in smaller quantities.
TLC 100M Reel of 10mm² T&E = £1.45 per meter + VAT
TLC 10M Cut of 10mm² T&E = £3.70 per meter + VAT
Only if you want to pay through the roof!
Quite; but then again the website may be registered in the name of the web developer who is in the Emirates on behalf of the business in the UK selling the cable.
http://www.whois.com/whois/abbottsway.com & https://who.wildwestdomains.com/whoisstd.aspx?domain=abbottsway.com&prog_id=wildwestdomains
I have also found the following two company's, although this may be a red herring and they may be totally unrelated to the ebay/abbottsway.com site.
Name & Registered Office:
ABBOTTSWAY ELECTRICIANS LIMITED
59 STANFORD ROAD
LONDON
UNITED KINGDOM
SW16 4PP
Company No. 09921483
&
Name & Registered Office:
ABBOTTSWAY ENGINEERING LTD
59 STANFORD ROAD
LONDON
ENGLAND
SW16 4PP
Company No. 08391855
Either way, you could end up getting genuine or fake cable from the ebay seller - you likely won't know until it's to late.
However both this & this listing list the conductor at the bottom of the listing as "Conductor: 1.0 - 2.5mm² - Class 1 solid copper conductor to BS EN 60228:2005 (previously BS6360)" even though advetised as 10mm² T&E. A genuine copy & paste mistake hopefully.
Links in this post may contain affiliate links for which DIYnot may be compensated.
Didn't come up for me. Just kept saying no results found. I was probably spelling it wrong, again
Wouldnt it just be easier to phone the ebay seller and ask him
Cut cables always dearer per metre than buying a roll
http://www.ebay.co.uk/itm/Twin-and-...hash=item3f44c25b50:m:mscxj8WBTkfM_Bw9FOFvdNA
Abbottsway Supplies
46 Biddiblack Way
Bideford
Devon
EX39 4AY
United Kingdom
Phone:07742|275014
Email:[email protected]
Cut cables always dearer per metre than buying a roll
http://www.ebay.co.uk/itm/Twin-and-...hash=item3f44c25b50:m:mscxj8WBTkfM_Bw9FOFvdNA
Abbottsway Supplies
46 Biddiblack Way
Bideford
Devon
EX39 4AY
United Kingdom
Phone:07742|275014
Email:[email protected]
Last edited:
Links in this post may contain affiliate links for which DIYnot may be compensated.
Ive had several lengths of Atlas Kablo (spelling ?) flex fail shortly after install, or at install. A bore hole company bought a huge drum of 2.5mm 4 and 5 core, and I had several call backs to check supply to top of bore hole. Our supply always fine to the top, but the flex was open circuit. Dissecting the flex found the copper snapped inside.
FFS. You only need 10metres of the stuff. Walk into any local electrical distributor and he'll cut you the length you want off the drum. The price difference won't be much, and you'll get a decent product.
"economically priced" cable sent for testing a few years ago was found to have various other metals in the copper along with flecks of ash. The copper had been re-cycled by burning scrap cables in a furnace and collecting the molten metal from the bottom of the furnace leaving the ashes from the insulation floating on the top.
The brand name was redacted from the report.
The brand name was redacted from the report.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
