- Joined
- 30 Nov 2018
- Messages
- 1
- Reaction score
- 0
- Country
Hello,
I just had a smart meter installed. After the engineer left I realised the Danfoss RX1 is no longer working.....the boiler is working and I have hot water but no heating. I realised it was the thermostat when I saw there were no lights on the receiver - usually the green PROG light is constantly lit I think. The thermostat is flashing 0F and I’ve tried syncing by holding down the LEARN button then holding CH and PROG together.....the green light does flash but then the heating still doesn’t come on. What is going on here please?! The boiler is a BAXI Combi and it does have a timer....I usually control when the heating comes on via the little timer switches. I don’t even want a thermostat, I just want the heating to come on!!!
I just had a smart meter installed. After the engineer left I realised the Danfoss RX1 is no longer working.....the boiler is working and I have hot water but no heating. I realised it was the thermostat when I saw there were no lights on the receiver - usually the green PROG light is constantly lit I think. The thermostat is flashing 0F and I’ve tried syncing by holding down the LEARN button then holding CH and PROG together.....the green light does flash but then the heating still doesn’t come on. What is going on here please?! The boiler is a BAXI Combi and it does have a timer....I usually control when the heating comes on via the little timer switches. I don’t even want a thermostat, I just want the heating to come on!!!