Hopefully a quick one, I think this is okay, and it's going to be checked but I don't want to have to rip it out.
I'm chasing in for a kitchen - I have a few backboxes horizontally above the worktop as normal. I've also put a back box below, but it's NOT inline with one of the ones above.
My understanding is that I can use a combination of the horizontal and verticle safe zones to have a T. I've drawn a crude diagram - where red represents the ring.
Is this acceptable?
I'm chasing in for a kitchen - I have a few backboxes horizontally above the worktop as normal. I've also put a back box below, but it's NOT inline with one of the ones above.
My understanding is that I can use a combination of the horizontal and verticle safe zones to have a T. I've drawn a crude diagram - where red represents the ring.
Is this acceptable?