Exposed pipes

[NickG88]

Does anyone know of a solution for connecting exposed hot and cold water pipes to a mixer or thermostatic shower?

 

[CBW]

You can get exposed versions of showers that cater for this, with drop down/upcoming feeds.

 

[denso13]

https://www.ebay.co.uk/itm/Bristan-...gs-Chrome-Plated-Bar-Fixing-Kit-/174148489214

 

[NickG88]

I’m having serious issues finding a mixer/thermostatic shower with dual bottom feed connections

 

[denso13]

I’m having serious issues finding a mixer/thermostatic shower with dual bottom feed connections

There's literally hundreds of them https://www.google.com/search?q=the...i395j69i60.11946j1j7&sourceid=chrome&ie=UTF-8

and connect it up with http://rover.ebay.com/rover/1/710-5...s-Chrome-Plated-Bar-Fixing-Kit-/174148489214?

 

[NickG88]

These are all rear feed shower bars, I understand how those elbow connectors will allow exposed pipes to connect...however this solution creates a problem of the riser bar being offset from the wall...

 

[denso13]

however this solution creates a problem of the riser bar being offset from the wall

No further than using the normal through the wall connectors or these which I prefer https://www.amazon.co.uk/Keenware-K...s=Bar+Shower+Fixing+Kit&qid=1609502221&sr=8-5.

What problem will a possible few millimetres give you? We can then possibly suggest a solution.

 

[NickG88]

The elbows which allow for the bottom feed to the shower bar offset the shower bar from the wall, therefore the outlet feeding the riser bar will also be offset meaning the riser bar will require an extended fitting to the wall...

 

[denso13]

therefore the outlet feeding the riser bar will also be offset meaning the riser bar will require an extended fitting to the wall

Do you mean the shower riser rail? The vast majority are a shower hose connection and won't be affected by the distance from the wall. Did you have a specific type of shower valve in mind?

 

[CBW]

Might be best if you post a photo of existing shower so we get what you mean.

 

[dontbelieveawordofit]

https://www.ebay.co.uk/itm/Bristan-...gs-Chrome-Plated-Bar-Fixing-Kit-/174148489214

I refuse to fit this make , taps also.
poor quality, always ends up with a moan.

 

[denso13]

I refuse to fit this make , taps also.
poor quality, always ends up with a moan.

It is only a bar mixer fixing kit, basically chrome wall plate elbows.

 

[dontbelieveawordofit]

It is only a bar mixer fixing kit, basically chrome wall plate elbows.

sorry , didn’t open it. it is actually a picture of a bristan mixer.