- Joined
- 17 Aug 2010
- Messages
- 2,762
- Reaction score
- 573
- Country
Putting tapered edge board up, (just the tapered bit gets taped and plastered.
Does it matter if there is a couple of mm gap between boards ? or is it important that they butt together. I'm thinking the plaster will fill a 2 or 3 mm gap. Also the bit that goes up at 90 degrees to another wall. does it matter if the tapered bit goes here? obviously with one wall it will have to be cut to squre edge, but is it best to do both walls like that ?
Does it matter if there is a couple of mm gap between boards ? or is it important that they butt together. I'm thinking the plaster will fill a 2 or 3 mm gap. Also the bit that goes up at 90 degrees to another wall. does it matter if the tapered bit goes here? obviously with one wall it will have to be cut to squre edge, but is it best to do both walls like that ?