Risco alarm

[MarcoM]

Hello,

I have a risco alarm but the panel does not have any label telling me which model it is.
The keypad is a G-TAG one.
There is a GSM communicator linked to the panel:wifi risco rp128EW08GTA.

I would like to decommission this system so that I can replace it with a system which I can activate remotely via app.
I don't have the engineer code so I am assuming that when I turn off the power to the panel the sirens will go off.
Is there anyway to decommission this so that the sirens will not be a pain?

Thanks

 

[Handymanjo]

All dependent on how it was setup.
Ladders on standby when you pull the power.

 

[sparkymarka]

That part number is a wireless expander for either a eurosec cpx or a gardtec 595 / 600

 

[MarcoM]

If the bell goes off how long will the flashing light last?
Normally the sound goes off after 20 kins but I am not sure this would be the same
once the battery is removed from the panel?

 

[Handymanjo]

No power to bell box, then strobe will not flash.
Bell cut off 20 mins,but older bells could ring longer.

 

[MarcoM]

No power to bell box, then strobe will not flash.
Bell cut off 20 mins,but older bells could ring longer.

Will the bell box not flash even if its has a battery?

 

[sparkymarka]

No

 

[MarcoM]

https://www.riscogroup.com/uk/products/product/51061

This is the bell we have.
So once i have disconnected the power to the alarm panel, this bell should ring for 20 mins but with no strobe flashing?

 

[Handymanjo]

Yes,if it's been installed correctly.