Currently fitting a new kitchen
Current cooker setup is a 6mm T&E from Board (B32 breaker) to cooker isolation switch then direct to the cooker
Our new kitchen has 2 single ovens in the design
Is it right to say I can buy a dual cooker connection plate and connect both ovens to this circuit
They...
Completed this job last weekend
I cut 1 panel through as needed 2 half panels
Once you have cut them, very carefully,
You then need a longer timber to reedge the now higher end of each half panel. You need a piece 40x45 with a 27mm groove in it. This then cups the edge of the lap boards. All...
hi need to connect a nest heat link to my Worcester Bosch Greenstar 30si 2008
I am only interested in the heating not water so should be 3 cables
Can someone just confirm my thoughts of where I connect too
Diagrams below
Many thanks
Have the government not increased permitted extension on a semi detached untill next year to 6 Mtrs from 3 without planning
Do you just submit a set oh plans for building control and pay ?
wouldn't do the work myself if I were you I'd consider having someone do the complete build. If your asking these questions are you up for the job to begin with? Footings and up to damp is the hardest and most crucial stage. Make sure its done right
We can’t afford to do it getting people in
I...
Sewer is not a problem as we are end of the run and is all to the right in garage
When you say a meter down that’s the depth I would dig too approx ?
Pitch roof may reduce the bedroom window height so won’t be a problem
Do I need building regs regardless as so no way around it as my neighbour...
hi
Planning on removing a conservatory and replacing with a single storey extension pitch roof, looking at the picture below can anyone see a problem leaving the existing soil pipe in position (manhole is in the garage )
Boiler flue is the biggest problem I can see
Also planning on getting to...
Above is what I have
apologise for being side on
I'm now thinking its not good to screw plasterboard to frame as for future access
I'm thinking I will hang the sheet on 45 angle back to back blocks so will slot down in and hang
Would you keep the 9.5mm plasterboard to tile on or change...